Optimisation of parameters of vibration control process by applying rheological dynamic model
Articles
Rimantas Didžgalvis
Lithuanian University of Agriculture
Antanas Sudintas
Kaunas University of Technology
Irena Tiknevičienė
Kaunas University of Technology
Published 2001-12-17
https://doi.org/10.15388/LMR.2001.34733
PDF

How to Cite

Didžgalvis, R., Sudintas, A. and Tiknevičienė, I. (2001) “Optimisation of parameters of vibration control process by applying rheological dynamic model”, Lietuvos matematikos rinkinys, 41(spec.), pp. 567–572. doi:10.15388/LMR.2001.34733.

Abstract

The process of vibration control in question is investigated when the sediment is described in terms of rheologic body. The summarised dynamic and mathematical models of the vibration cont­rol are presented. In the partial case the sediment is described in terms of elastic-tough-plastic body. It is assumed that the vibration power is directed to the surface under cleaning at a certain angle therefore the process is analysed in tangent and normal directions. There is detennined optimum criteria for the vibration control process. The solution of the system is presented for the case when the angle of the influence power θ = 1. There are presented the main characteristics of the process and conclusions on it.

PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Downloads

Download data is not yet available.